Saipa Tiba 2, Руководство пользователя

Страница: 81 / 147

6
81
If there is a coolant leakage
from the radiator, let the engine
run in the idle condition, open
the engine hood , and wait until
the engine returns to its normal
temperature.
If the engine temperature does
not decrease, turn off the engine
until it becomes cool.
4- Check the coolant level ini -
side the tank, if the level is low,
check for any leakage from the
cap of the radiator, hoses, wa -
ter pump, and from the fittings of
the radiator or heater. In case of
leakage, do not turn the engine
on until removing the fault by an
authorized SAIPA dealer.
Booster cables connections
Booster cables connections
Connect the booster cables in order
of the numbers indicated in the figure
and disconnect in reverse order.
1- Turn off all the unnecessary elece -
trical equipment of the vehicle.
2- Connect the cables exactly in the
order that is shown in the figure.
First connect the one end of the first
cable to the positive terminal (+) of
the dead battery (1) and the other
end to the positive terminal of the
booster battery ( 2 ). Then connect
the one end of the second cable to
the negative terminal of the booster
battery and the other end to the
fixed metal point of the vehicle with
the dead battery. Be careful that the
ground connection keep far from the
dead battery.
Make sure not to connect the
negative terminal of the booster
battery to the negative terminal of
the dead battery. Be careful about
the cable ends to be connected to
the proper points.
Do not lean when connecting the
cables.
3- First turn on the engine of the
vehicle with the booster battery and
increase its rpm up to 2000 , then
start the engine of the vehicle with
the dead battery.
If the discharging cause is not
known (other than staying on the
lamps while the engine is off), it
is necessary for the vehicle to be
checked by an authorized SAIPA
dealer.
Starting the vehicle by pushing
Starting the vehicle by pushing may
cause damage to the emission
control system.
Caution
Do not start the engine by towing
the vehicle.
Because of the sudden motion
of the vehicle toward front when
starting, can cause the collision of
the two vehicles to each other.