SAINT-GOBAIN ABRASIVES NORTON CDP 300, Руководство по эксплуатации

Страница: 16 / 33

CDP 300 / 350 KP_MAN_EN
VERS. 2017.04.25
16
4.5 Safety instructions for certain phases of work
Before commissioning:
Avoid any work that could interfere with safety! Before starting work, familiarize yourself with the
working conditions existing on the site!
These conditions include, for example, the obstacles present in the working and traffic area, the re-
sistance of the ground and the necessary protective devices between the site and the public road!
Take measures to ensure that the machine operates only in a safe and operable condition!
Only operate the machine when all protective and safety devices, such as removable protective
devices etc, are in place and in working order!
Comply with technical safety and occupational health regulations.
Check the machine at least once per workstation for damage and defects visible from the outside!
Report immediately any changes (including changes in work behavior) to the appropriate person /
position!
In case of malfunction, stop the machine immediately and lock it! Make it troublesome immedi-
ately!
The operator must ensure that he has a free field of view on his workstation so that he can inter-
vene at any time in the work process.
Use only under watering, to avoid the formation of dust that is harmful to health and to increase the
lifetime of the tool.
During start-up and shut-down operations observe the control indicators according to the operating
instructions!
Before starting the machine, make sure that nobody can be take a risk by starting the machine.
Keep children and unauthorized persons away from the work area.
The noise protection devices must be in place on the machine during the working phases, the user
and persons present at the workplace must wear the necessary noise protection!
Be sure to keep your distances from the trenches and embankments! Do not perform work when
the machine is not in a safe working position! The workplace must be clean and tidy! Disorder in-
creases the risk of accidents! Do not work when you are tired. Concentrate on your work.
Beware of tripping! Always unroll fully extension cords and hose rollers. After assembly, do not
leave tools, like keys on the machine.
Diamond drills must comply with NORTON CLIPPER specifications. Defective tools must be re-
moved and replaced immediately. Check if the area is crossed by electrical, water or gas lines!
During commissioning
Fix the drill securely and check it during the drilling operation!
Never touch the rotating parts, especially the drill and the drive shaft!
After commissioning
Before leaving the work area, make sure that the machine can not be switched on accidentally!