saia-burgess PCD 7 Series Скачать руководство пользователя страница 32

Страница: 32 / 36

Saia-Burgess

Controls Ltd.

Beginners’ manual Series xx7│Document 26/835; Version E 2│22.04.2005

Appendix

4-1

Icons/Product and documentation concept

Appendix

4.1

Icons

In manuals, this symbol refers the reader to further information in this manual or

other manuals or technical information documents.

As a rule there is no direct link to such documents.
This symbol warns the reader of the risk to components from electrostatic dis-

charges caused by touch.

Recommendation:

at least touch the Minus of the system (cabinet of PGU

connector) before coming in contact with the electronic parts. Better is to use a

grounding wrist strap with its cable attached to the Minus of the system.
This sign accompanies instructions that must always be followed.

Classi

Explanations beside this sign are valid only for the SAIA-Burgess PCD Classic

serie.

xx7

Explanations beside this sign are valid only for the SAIA-Burgess PCD xx7 serie.

4.2

Product and documentation concept

The Saia

PCD product range

is rigorously modular in structure. It demonstrates

a clear hierarchy of systems, sub-systems, functions and diverse accessories. Fully

developed software tools allow the efﬁcient creation of user programs.

All Saia

PCD systems (up to PCD6) work with the same operating system. The PCD

systems communicate easily with each other and PCD user programs run on all sys-

tems.

PCDn xx7 series controllers have a special operating system. This enables them to

be programmed with Siemens

STEP

7 and to communicate readily with the corre-

sponding systems of other manufacturers.

Saia

PCD customer documentation

comprises pre-sales and after-sales docu-

ments that complement each other. As a rule, they are published in three language

versions (German, English, French).

Содержание PCD 7 Series





































Результаты поиска

Содержание PCD 7 Series

Отзывы:

Похожие инструкции для PCD 7 Series

Бренды по названию

Популярные бренды

saia-burgess PCD 7 Series, Руководство для начинающих

Результаты поиска

Содержание PCD 7 Series

Отзывы:

Похожие инструкции для PCD 7 Series

Бренды по названию

Популярные бренды