saia-burgess PCD 7 Series Скачать руководство пользователя страница 5

Страница: 5 / 36

Beginners’ manual Series xx7│Document 26/835; Version E 2│22.04.2005

Saia-Burgess

Controls AG

Documentation

Introduction

1-2

For applications that go beyond this, please contact us at:

[email protected]

1.2.2 CPU comparison

The instruction set and component addressing for the PCD1.M137 are comparable

with the Siemens CPU 412. With the PCD2.M127/M157/M177/M487 controls, the

instruction set is roughly equivalent to the Siemens CPU 414. There is generous

provision of user memory.

PCD1.M137 = 64 (default) / max. 128 kB (conﬁgurable)

PCD2.M127 = 128 kB

PCD1.M157 = 256 (default) / max. 512 kB (conﬁgurable)

PCD1.M177 = 512 (default) / max. 1 MB (conﬁgurable)

PCD2.M487 = 1 MB

PCD3.M5547= 512 kB

PCD3.M5447= 512 kB

Further information on memory settings can be found in manual “26/797 xx7 System

functions”, in the section on “System conﬁguration”.

Because of the differing command execution times, operating speeds can only be

approximately compared. The PCD1.M137 and PCD2.M127 are about 3 times slower

than the PCD2.M157 and PCD2.M177, which themselves achieve roughly the same

cycle time as the Siemens CPU 315. The PCD2.M487 attains the operating speed of

the Siemens CPU 318.

1.2.3 How is the

Saia

PCD Series xx7

conﬁgured?

Conﬁguration of the CPU (MPI address, impulse byte, interrupt OBs, etc.) is handled

by Simatic Manager. Updated CPU settings take effect on the next STOP->RUN

transition.

Conﬁguration of networks (Proﬁbus, Ethernet) is also handled by Simatic Manager.

Further information can be found in manual “26/798 xx7 communication facilities”.

The addressing and conﬁguration of local I/O modules, and SAIA-speciﬁc CPU

and interface settings, are handled by data blocks generated with a free-of-charge

software tool, the I/O Builder. You can download the I/O Builder from the Internet,

from

http://www.sbc-support.ch/overview/xx7Conﬁguration.htm

. Detailed information

on the I/O Builder can be found in this manual, from section 2 onwards.

1.3

Documentation

1.3.1 Where can I ﬁnd information on the Saia

PCD Series xx7?

You will ﬁnd Technical Information documents (TIs) and various manuals on the

Saia

PCD Series xx7 on our support site. You can download these documents from

http://www.sbc-support.ch/xx7/xx7doc.htm

Содержание PCD 7 Series





































Результаты поиска

Содержание PCD 7 Series

Отзывы:

Бренды по названию

Популярные бренды

saia-burgess PCD 7 Series, Руководство для начинающих

Результаты поиска

Содержание PCD 7 Series

Отзывы:

Бренды по названию

Популярные бренды