Beginners’ manual Series xx7│Document 26/835; Version E 2│22.04.2005
Saia-Burgess
Controls AG
Confi guring communication modules
Configuring I/O modules with the I/O Builder
3-15
3
i
Further information on the PCD2/3.H31x module can be found in the “26/762 H31x
manual”.
i
Further information on the PCD2.H32x module can be found in the “26/778 H32x.xx7
manual”.
3.9
Configuring communication modules
The “Communication Modules” catalog contains the interface modules for the serial
interface on Slot A:
No properties can be set for the communication modules. They are only used as
place-holders.
3.10
Configuring function modules
The “Function Modules” catalog contains interfaces and field bus modules for Slots
B1 and B2.
No properties for the function modules can be entered in the I/O Builder. They are
only used as place-holders. Module-specific settings are entered directly in STEP
®
7.
i
Further information can be found in manual “26/798 xx7 communication facilities”.
