Communication commands according to EN 62056-21
Page 56 of 62
ZDUE-LTE-PLUS-VII
9.5.3
Write PIN
Function
Write PIN
Command format:
<SOH>W1<STX>S93(<PIN_Len><PIN>)(<set password>) <ETX><BCC>
Response format:
<ACK>
Legend
PIN_Len:
Length of PIN
PIN:
PIN to be set
Set password: Set password parameterised in the ZDUE-LTE-PLUS-VII
Explanation:
This command sets the PIN in the device to the new value. The PIN on the
card is not changed. Any PIN error status is deleted with this command.
This command is also permitted via the LTE/GPRS connection.
9.5.4
Read out parameter checksum
Function
Read out parameter checksum
Command format:
<SOH> R3<STX> S61( )<ETX><BCC>
Response format:
<STX>S61(cccc)<ETX><BCC>
Legend:
cccc :
Hex-coded 16-bit parameter checksum
Explanation:
This command is also permitted via the LTE/GPRS connection.
9.5.5
Read out the firmware version of the ZDUE
Function
Read out the firmware version of the ZDUE
Command format:
<SOH> R3<STX> S63( )<ETX><BCC>
Response format:
<STX>S63(version)<ETX><BCC>
Legend:
version :
z. B. ZDUE_PLUS_VII_V8.014
Explanation:
This command is also permitted via the LTE/GPRS connection.
9.5.6
Read the firmware version of the radio module
Function
Read out the firmware version of the radio module
Command format:
<SOH> R3<STX> S64( )<ETX><BCC>
Response format:
<STX>S64(version)<ETX><BCC>
Legend:
version :
.B. EFCR06A06M4G
Explanation:
This command is also permitted via the LTE/GPRS connection.
9.5.7
Read version of the booter
Function
Read version of the booter
Command format:
<SOH>R3<STX>S96(14)<ETX><BCC>
Response format:
<STX>S96(14)(<data>)<ETX><BCC>
Legend:
<Data>:
Version of the booter, e.g. 5.005
Explanation:
This command is also permitted via the LTE/GPRS connection.
Содержание Dr. Neuhaus ZDUE-LTE-PLUS-VII
Страница 1: ...ZDUE LTE PLUS VII User manual...