Operation in meter mode
Page 26 of 62
ZDUE-LTE-PLUS-VII
Regular
disconnection
Connection termination after transfer timeout:
The ZDUE-LTE-PLUS-VII terminates a regular data connection after the
transfer timeout has expired. This means: If there is no data transfer
between the head end system and the ZDUE-LTE-PLUS-VII or the meters
connected to the ZDUE-LTE-PLUS-VII within the specified timeout (default:
99 seconds), the ZDUE-LTE-PLUS-VII will terminate the connection.
Disconnection by the head end system:
For its part, the head end system can terminate a connection at any time.
6.2 Establishing a connection to the mobile network
Dialling into the
mobile network
The connection to the mobile network is established automatically after the
device is restarted.
For a successful connection setup, the LTE/GPRS access data must be
configured in parameter classes 60 and 61:
Provider (selection of the LTE/GPRS network provider, e.g. T-D1,
Vodafone)
PDP Context (access parameters of the LTE/GPRS network operator)
USER (Login name for the LTE/GPRS network)
PASSWORD (Login password for the LTE/GPRS network)
Dial-in string (Not used)
DNS1 (Primary Domain Name Server of the LTE/GPRS network;
optional)
DNS2 (Secondary Domain Name Server of the LTE/GPRS network;
optional)
In addition, the timing behaviour in the event of problems with LTE/GPRS
dial-up can be set via class 82.
Caution
Please note that data packets are also exchanged during the (re-
)establishment of a connection, during connection attempts to the remote
terminal (e.g. server switched off, wrong destination address, etc.) as well as
to maintain a connection. Please take this into account especially when
using chargeable networks.
Attention
To be able to operate the ZDUE-LTE-PLUS-VII, a SIM card activated for
LTE/GPRS must be used. If necessary, contact your mobile phone provider.
Содержание Dr. Neuhaus ZDUE-LTE-PLUS-VII
Страница 1: ...ZDUE LTE PLUS VII User manual...
