Sagem WP 1130, Инструкция по эксплуатации

Страница: 25 / 60

22
MENU
MENU
MENU
Factory default settings of the handset
The handset can be reset at any time to the default settings
when it left the factory.
The following list shows the original default settings of the
handset:
Function Setting
Pin 0000
Ring internal call 1, volume = loud
Ring external call 1, volume = loud
Key beeps on
Press the MENU key several times until Telephone is
displayed.
Press the OK key to confirm.
Press the MENU key several times until Subscribe is
displayed.
Press the OK key to confirm.
Press the MENU key several times until Reset HS is
displayed.
Press the OK key to confirm.
HS Pin? will then be shown on the display
.
Enter the pin of the handset (default 0000).
Press the OK key to confirm.
If you have entered the incorrect pin, you will hear a warning
signal and Wrong Pin will appear on the display. After a few
seconds Subscribe will appear again.
Reset? will now appear on the display.
Press the OK key to confirm.
If this procedure has been carried out without any errors, the
base station will confirm with an acoustic signal.
Subscribe will
appear on the display.
Press the Back key several times or wait 20 seconds until
the telephone switches back into the idle condition.