Sagem WP 1130, Инструкция по эксплуатации

Страница: 22 / 60

19
MENU
MENU
Registering
The registering (subscribing) mode of the base
station
Switch the base station to the registering mode first.
There is a key on the base station which is used for searching
and registering handsets. Press this key and keep it pressed
(the handset must be on the base station).
After approximately 5 seconds the green lamp will start to
flash. The base station will now be in the registering mode for
the next minute.
The handset is on the base station:
You can register a maximum number of 5 handsets at a base
station.
This step must also be repeated in order to register a handset
at further base stations. Handsets can only be used if they
have been registered at a base station.
If the handset has not yet been registered, Subscribe Hs will
appear on the display.
Option 1
Press the YES button in order to have a number assigned
automatically to the handset.
Option 2
Press the MENU key several times until Telephone is
displayed.
Press the OK key to confirm.
Press the MENU key several times until Subscribe is
displayed.
Press the OK key to confirm. Subscribe Hs will then appear
on the display.
Press the OK key to confirm.
Base - - - -? will then be displayed.
Enter the number of the base station (1 to 4) which you would
like to register the handset at. Enter 1 for a new handset.
Press the
OK key to confirm.
Searching will appear on the display.
When the handset has found the base station, Found Base
will be displayed for 3 seconds as well as the registering code
of the system. Confirm this by pressing
OK . Bs Pin? will then
appear on the display .
Enter the pin of the base station (default 0000).
Press the OK key to confirm.
If the pin is correct, Subscribe Hs will be displayed.
After a few seconds, the handset will confirm by giving an
acoustic signal.
If you have entered the incorrect pin, the error will be
acknowledged with an acoustic signal.
Wrong Pin will appear
on the display. After a few seconds Subscribe will be
displayed again.
Or
An acoustic signal will be given if the base station is not found
and
Subscribe will appear on the display.
Press the Back key several times or wait 20 seconds until
the telephone switches back into the idle condition.