Sagem WP 1130, Инструкция по эксплуатации

Страница: 13 / 60

10
MENU
MENU
MENU
Selecting the base station
If you are employing more than one base station, you can
select which one will be used. This selection can, however,
also be carried out automatically by the handset (decisive
here is the quality of the respective receive signal).
Press the MENU key several times until Telephone is
displayed.
Press the OK key to confirm. HS Settings will appear on the
display.
Press the OK key to confirm.
Press the MENU key several times until Select Base appears.
Press the OK key.
The available base stations will then be shown on the display
(e.g.
Base 1-3-? ).
You will hear a signal if you enter the number of a base which
does not exist.
Enter the number of an available base station (e.g. 3) and
then press the
OK key.
Or
Press the MENU key ( Auto ) in order that the handset selects
the base station with the strongest signal.
MENU
MENU
MENU
Press the OK key to search for the selected base
station.
Searching will then appear on the display.
When the connection to the base station has been
established, you will hear a signal and the HS Settings
menu will be displayed.
Or
If no base station is found within 10 seconds, the
handset will switch back to the original base station.
Press the Back key several times or wait 20 seconds
until the telephone switches back into the idle condition.
Selecting the language
Press the MENU key several times until Telephone
appears on the display.
Press the OK key to confirm. HS Settings will then
appear.
Press the OK key to confirm.
Press the MENU key several times until Set Language
is displayed.
Press the OK key to confirm.
Press the MENU key in order to scroll through the
available languages.
English – Deutsch – French – Nederlands – Spain –
Italiano
Press the OK key to select a language.
Press the Back key several times or wait 20 seconds
until the telephone switches back into the idle condition.