Sagem OT 4X8 RF, Руководство пользователя

Страница: 8 / 64

8
The SIM card is inserted under the phone’s battery. Ensure
that the phone is switched off and the charger
disconnected.
1 Slide the SIM card, with cut corner as shown on the
phone, into the card holder with fold face down.
2 Place the battery by positioning first the top of it, as
shown on the battery.
3 Place the back cover, clicking in first the upper part
then the lower part.
Proceed as follows to remove the back cover (in case of
replacement of the battery or the SIM card, for instance):
Turn the phone back. Use the notch (1) as a lever to lift the
cover (2).
- Open the protective cover of the slot located on the side
of the phone and insert the memory card pushing it until
it clicks into place.
- To remove the card, first make sure that no application is
accessing the card, then slightly push the top edge of the
card to release it and pull it out of the slot..
The memory card is very fragile. Take care when you
insert or remove the memory card.
The memory card may suffer damage if withdrawn
during a read or write operation. Ensure that no
application accesses the card during its withdrawal.
Some memory cards must be formatted with a PC
before first use with the phone.
252918356_LU_ME2006a_OT4x8 RF_US_en.book Page 8 Mercredi, 28. février 2007 9:02 09