Sagem OT 4X8 RF, Руководство пользователя

Страница: 50 / 64

50
-(1#.$%7
If a wrong PIN number is entered three times in succession,
your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided
by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM
card), the SIM card is definitely locked. You must then
contact your operator to obtain a new card.
-(#.$%7
In certain cases, the handset can only be used with some
types of SIM cards. This message means that the SIM card
you are using does not fit with the phone. Take the SIM card
out, and switch it back on. If the message -(
appears on the screen, you will need to check its
compatibility next to the place where you bought it. If not,
please contact your after-sales service.
Check that the number you have dialled is correct.
If the letter R is displayed on the top right corner of the
screen, without any network name displayed, only
emergency services can be called.
Check the status of your credit.
Check that the SIM Card you are using offers the service
you are requesting; check if its validity has not expired.
Check and deactivate the outgoing calls restriction when
necessary.
The network could be saturated. Try later.
If the problem persists, please contact your Technical
Helpdesk.
&
Try to make a call in order to check that the phone and the
network are operational.
Check and deactivate the permanent call forwarding
(permanent call forwarding icon displayed on the screen).
Check and deactivate the incoming calls restriction when
necessary.
If the problem persists, please contact your Technical
Helpdesk.
O) 5
Avoid placing your fingers on the top of the phone, where
the aerial is integrated: the phone will have to use full
strength to establish a quality transmission.
Check that your SIM card does offer this service. Try to
make a call to check that phone and network are
operational.
Check if the voicemail number is properly configured
Check that the message centre number is correctly entered.
To do so, go to the
(2#2-(-
menu, select
()
and check the number.
&
Check that your subscription does offer this service.
Program the call to be forwarded to voicemail using the
information provided by the operator.
#
Go into the
-
menu, select
5
, then
- . Wait until the operator appears, select it and
validate.
If the Operator logo is present (depending on model),
activate the display ( - / 7 / # ).
*5 J
Activate the eco mode (see - / 7 / %
&
).
252918356_LU_ME2006a_OT4x8 RF_US_en.book Page 50 Mercredi, 28. février 2007 9:02 09