S
Proc Sheet 1 04
myX-6/myV-65
REMOVING / REPLACING THE ELECTRONIC
BOARD
1/2
Ref. SCT U38 SSC DTS 0012 – Index A - May 12 , 2003
Page 5-21
Tools :
- A 0.6mm torx screwdriver
Preliminary operation
1. Remove the back cover (
Proc sheet 0 01
).
2. Remove the battery (
Proc sheet 0 02
).
3. Remove the front cover (
Proc sheet 0 03
).
Removal procedure :
1. Unscrew the six attachment screws on the assembly plate
2. Remove the assembly display
(Proc sheet 1 02)
3. Remove the light guide keypad
(Proc sheet 1 03)
4. Remove the electronic board (1) on the assembly plate (2)
Placement procedure :
1. Replace the new electronic board on the assembly plate (2).
2. Replace the light guide keypad on its housing
(Proc sheet 1 03)
.
3. Replace the assembly display (
Proc sheet 1.02
)
4. Position and tighten the six attachments screws with torx couple of
0,25 N.m.
Further operations :
1. Replace the front cover (
Proc sheet 0 03
).
2. Replace the battery (
Proc sheet 0 02
).
3. Replace the back cover (
Proc sheet 0 01
).
4. Carry out the radio test (
Test Sheet 06
).
