S
Proc Sheet 1 03
myX-6/myV-65
REMOVING / REPLACING THE LIGHT GUIDE
KEYPAD
1/2
Ref. SCT U38 SSC DTS 0012 – Index A - May 12 , 2003
Page 5-19
29/09/03- SAV/GSM/254/V1 EN
Tools :
- A 0.6mm torx screwdriver
Preliminary operation
1. Remove the back cover (
Proc sheet 0 01
).
2. Remove the battery (
Proc sheet 0 02
).
3. Remove the front cover (
Proc sheet 0 03
).
Removal procedure :
1. Unscrew the six attachment screws on the assembly plate (1)
2. Remove the assembly display (
Proc sheet 1.02
)
3. Remove the light guide keypad (2).
Placement procedure :
1. Replace the new light guide keypad on its housing.
2. Replace the assembly display (
Proc sheet 1.02
)
3. Position and tighten the six attachments screws with torx couple of
0,25 N.m.
Further operations :
1. Replace the front cover (
Proc sheet 0 03
).
2. Replace the battery (
Proc sheet 0 02
).
3. Replace the back cover (
Proc sheet 0 01
).
4. Carry out radio test (
Test Sheet 06
).
