INSTALLATION GUIDE
Page 40 / 46
3 000 068 637 éd04/ 542
Simply powering up enables the terminal to memorize that there is no battery; it will then
perform correctly with the future battery.
12.3. LITHIUM
BATTERY
For the attention of maintenance departments:
Warning
: this equipment is provided with a
lithium battery
. There is a
risk
of explosion if
this battery is incorrectly replaced. Replace using only a battery recommended by the
manufacturer.
Dispose of used batteries according to current recycling legislation.
Only qualified personnel can be authorized to service this component.
12.4. CLEANING
THE
UNIT
• Unplug all the wires from the base.
• Use a soft cloth
VERY SLIGHTLY
dampened with soapy water to clean the Portable
hoods and the base. Do not clean the contacts.
• The terminal-base connection may become contaminated by dust, and your unit could
then show the following faults:
-
Even when put on the base, the terminal does not recharge or charge.
-
The terminal does not detect the telephone line.
You should then clean the electrical contacts of the terminal and base connections:
-
Clean off all visible dust with a dry cloth.
-
Then, dip a cotton bud in domestic alcohol and squeeze it slightly damp (liquid
must not penetrate inside the equipment). Rub the cotton bud on the contact
surfaces several times to remove all particles adhering to them and/or
electrostatically charged particles (contamination can be difficult to see with the
naked eye).
-
Return the terminal to use.
13. TRANSPORT AND STORAGE
•
Use the original packing material for any unit transport or storage.
• Disconnect the battery whenever the portable is not to be used for a period exceeding
one month.
The method to disconnect the battery is indicated in the § "Changing the battery".
