Sage The Smart Grill Pro BGR840, Инструкция пользователя

Страница: 10 / 14

18 19
CARE & CLEANING TROUBLESHOOTING
NOTE
Do not use abrasive cleansers or metal
scouring pads on any of the interior or
exterior surfaces of the grill. These will
scratch the surfaces and damage the
non-stick coating on the cooking plates.
The underside of the cooking plate
may discolour over time and can form a
layer of corrosion. This is normal. Any
discolouration that may occur to either
side of the cooking plate will only detract
from the appearance of the plate and will
not affect the cooking performance.
To remove discolouration or corrosion,
use a non-abrasive plastic scouring pad
or nylon washing brush. Rinse and dry
thoroughly.
Ensure the round pad on the underside
of the plate is clean.
STORAGE
1. Ensure the grill is turned OFF by turning
the PLATE TEMP dial to the OFF position.
The grill is OFF when the LCD screen
displays OFF. Remove the power plug from
the wall outlet.
2. Allow the grill, cooking plates and drip tray
to cool completely.
3. Ensure the grill, cooking plates and drip
tray are clean and dry.
4. Ensure the drip tray is correctly
re-inserted into the grill.
5. Ensure the cooking plates are correctly
re-inserted and securely locked
into position.
6. Ensure the cooking plates are locked
together by sliding the adjustable
height control away from you, into
the LOCK position.
7. Wrap the probe cord around the PROBE
STORAGE on the right side of the grill,
then locate the probe into the recess on
the face of the PROBE STORAGE.
8. Store on a flat, dry, level surface.
Alternatively, the grill may be stored in an
upright position.
TROUBLESHOOTING
ERROR MODES
Er1 - Cooking Plates are inserted incorrectly.
When the LCD screen displays ‘Er1’ error mode:
1. Ensure the cooking plates are correctly and
securely inserted into position.
2. The LCD screen should no longer display
‘Er1’ error Mode.
3. If the problem continues, call Sage
Customer Service on 0808 178 1650 | 0333
0142 970 or go to sageappliances.co.uk.
Er2 - Probe temperature has exceeded 180°C.
When the LCD screen displays ‘Er2’ error mode:
1. Unplug the grill from the wall outlet.
2. Ensure the probe is not contacting the
heating plates.
3. Allow probe to cool.
4. Re-insert the plug into the wall outlet.
5. The LCD screen should no longer display
‘Er2’ error Mode.
6. If the problem continues, call Sage
Customer Service on 0808 178 1650 | 0333
0142 970 or go to sageappliances.co.uk.
Er3 - Overheat Protection.
When the LCD screen displays ‘Er3’ error mode:
1. Unplug the grill from the wall outlet
2. Ensure the grill is completely cool.
3. Re-insert the plug into the wall outlet.
4. The LCD screen should no longer display
‘Er3’ error Mode.
5. If the problem continues, call Sage
Customer Service on 0808 178 1650 | 0333
0142 970 or go to sageappliances.co.uk.