SAGA1-L Series
19
IV. The operation of the program:
Note:
a. Make sure the power is off before any reading or writing either
on the transmitter or receiver.
b. Check the connection port on RS232 whether it is on “COM1” or
others if the reading failed.
c. Do aware to read first every time before writing or making any
function setting.
d. This software allows user to read or write directly from both the
transmitter and receiver.
1. Connect the interface cable (RS232) with the transmitter of receiver.
2. When the computer is connected with the transmitter or receiver, click on
or
to read the data, then click “OK” after the new data is input, and
a new screen with “Model” and “ID-Code” appeared as below (lower picture).
3. When the new settings or modification have been made, click
or
to write data into the transmitter or receiver, then click “YES”.
3. If you want to save the new setting, click on
to save the data with “DSA”
format.
4. To print out the setting, click on
.
V. Function setting of SAGA1-L by PC Software
Definition for special terms:
*
ID-Code Remote Setting :
When the power is on, the ID-Code of the receiver can be
changed remotely by the transmitter within 4 minutes.
*
Power Saving:
The signal is sent by the transmitter periodically to save power, the effective
distance will be lessened once this mode is chosen.
Содержание saga1-l4
Страница 1: ...INSTALLATION OPERATION MANUAL...