SAFWAY Hunnebeck Safescreen Скачать руководство пользователя страница 136

Страница: 136 / 156

136

Unless stated otherwise all dimensions are in mm

Installation and Operation

8.2 Installation on-site

8.2.1 Support Shoes installation

When fixing the Support Shoe to the slab, place the shoe so it is at an angle to the slab

edge but not protruding outside the structure.

Secure with rear anchor first and rotate the shoe to the correct position.

Tighten with both anchors.

Upper Shoe:

Check Side Clamp Front Pins have been removed and the Side Clamps are open.
Ensure Locking Pin / Anti-uplift Latch of the upper shoes have been slid into “back”

position.

Upper Shoe

Anti-uplift Latch in

“back” position.

WARNING

Warning!

Temporary Works to remain in place during installation of Support Shoe in order to

provide edge protection.

WARNING

Warning!

Avoid any potential shoe tilt or fall.

NOTE

Note

lotted holes allow for 19 mm (+/-) adjustment.

Содержание Hunnebeck Safescreen





























































































































































Результаты поиска

Содержание Hunnebeck Safescreen

Отзывы:

Похожие инструкции для Hunnebeck Safescreen

Бренды по названию

Популярные бренды

SAFWAY Hunnebeck Safescreen, Руководство пользователя

Результаты поиска

Содержание Hunnebeck Safescreen

Отзывы:

Похожие инструкции для Hunnebeck Safescreen

Бренды по названию

Популярные бренды