SAFWAY Hunnebeck Safescreen Скачать руководство пользователя страница 8

Страница: 8 / 156

Unless stated otherwise all dimensions are in mm

Product Features

•

Lifting

When applicable, the lifting requirements of the individual components and / or

pre-assembled parts must be followed.

•

Genuine Components

The information provided assumes that any product combinations will be between

genuine HÜNNEBECK products or products supplied by HÜNNEBECK unless

otherwise stated.

Combining components from different manufacturers carries certain risks. They are to

be individually verified and a separate set of assembly instructions for the installation

of the equipment may be required.

Any unauthorised use in relation to third party products could give rise to a risk of

collapse, damage, injury or death.

•

Spare Parts and Repairs

Only original components may be used as spare parts. Repairs are to be carried out

by the manufacturer or by authorised repair facilities only.

1.5 Document Information

•

Representations

The representations shown in the assembly instructions are in part, situations of

assembly and not always complete in terms of safety considerations. The safety

installations which have possibly not been included in these representations must

be available and must be in accordance with the latest regulations. Overviews

and diagrams are for illustrative purposes only and whilst we endeavour to ensure

accuracy, we are not responsible for omissions or errors.

•

Safety Symbols

Individual safety symbols are to be complied with.

Examples:

DANGER

Danger!

DANGER indicates a hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING

Warning!

WARNING indicates a hazardous situation which, if not avoided, could result in death

or serious injury.

CAUTION

Caution!

CAUTION used with the safety alert symbol indicates a hazardous situation which, if

not avoided, could result in minor or moderate injury.

NOTE

Note

NOTE refers to practices not related to personal injury.

VISUAL CHECK

VISUAL CHECK refers to a visual check and is not related to personal injury.

•

User Guide Compliance

HÜNNEBECK will not be liable for any damage to property, personal injury or any

losses caused by failure to follow the instructions contained in this guide. It remains

the responsibility of the user to comply with the applicable legislation.

Содержание Hunnebeck Safescreen





























































































































































Результаты поиска

Содержание Hunnebeck Safescreen

Отзывы:

Похожие инструкции для Hunnebeck Safescreen

Бренды по названию

Популярные бренды

SAFWAY Hunnebeck Safescreen, Руководство пользователя

Результаты поиска

Содержание Hunnebeck Safescreen

Отзывы:

Похожие инструкции для Hunnebeck Safescreen

Бренды по названию

Популярные бренды