This document and the information therein are the property of Morpho, and must not be
copied or communicated to a third party without the prior written authorization of Morpho.
8
Power supply from electrical source shall be switched off before starting the installation.
Before proceeding, make sure that the person in charge of installation and connections, is properly connected to
earth, in order to prevent Electrostatic Discharges (ESD).
Wiring Overview
MorphoAccess® SIGMA Lite Series
–
Quick User Guide - 2015_2000005700-V4
All connections of the terminal are of SELV (Safety Electrical Low Voltage) type.
St
ep
tw
o
:
w
iring
7 wires
RJ-45
Backup of the Date/Time of the terminal:
the volatile settings (such as date/time) of the terminal are protected against
power failure, by a dedicated component during a least 24 hours (at 25
o
C) without external power supply.
RJ-45 : Ethernet & PoE
25
ETH TX+
Orange
1
27
ETH TX-
Orange / White
2
29
ETH RX+
Green
3
31
ETH RX-
Green / White
6
30
ETH VPORT+
Blue
4&5
32
ETH VPORT-
Blue / White
7&8
28
ETH GND
Drain wire (no color)
shell
Internal Relay
19
RELAY_NO
Yellow
21
RELAY_NC
Orange
22
RELAY_COM
Grey
Wiegand IN & Wiegand OUT
13
WIEGAND_IN0
Green / Red
15
WIEGAND_IN1
White / Red
14
WIEGAND_OUT0
Green
16
WIEGAND_OUT1
White
17
WIEGAND_LEDOUT1
Blue
18
WIEGAND_LEDOUT2
Blue / Red
20
WIEGAND_GND
Black / Red
RS-485, GP IN & OUT
5
RS485_A
Blue
7
RS485_B
Blue / Red
6
RS485_GND
Black / Red
9
GPI_0
Orange
10
GPI_1
Orange / Red
11
GPO_0
Yellow
12
GPO_1
Yellow / Red
8
GPIO_GND
Black / Red
Power supply & Tamper switch
1
Power + 12V
Red
2
Power GND
Black
3
SWITCH_PIN1
Light Blue
4
SWITCH_PIN2
Pink
