This document and the information therein are the property of Morpho, and must not be
copied or communicated to a third party without the prior written authorization of Morpho.
16
First communication with terminal (1/2)
MorphoAccess® SIGMA Lite Series
–
Quick User Guide - 2015_2000005700-V4
First configuration requires a network link
The MorphoAccess
®
SIGMA Lite Series terminal is designed to be able to run in
standalone mode, but at least point to point connection between PC and terminal is
necessary for the first configuration. It could also be necessary for database
management, terminal maintenance, …
St
ep
fiv
e:
Adm
inis
trat
io
n
Network connection methods
Point to point Ethernet connection
This method requires a static IP configuration (except
if DHCP server is installed on PC)
‒
Use MorphoBioToolBox to configure network parameters
(see next page)
Connection through a LAN (Local Area Network)
If DHCP server is available on the network, network
parameters will be automatically affected to terminals
(contact your network administrator).
If no DHCP server is available, it is necessary to
configure a static IP on each terminal and PC.
‒
Use MorphoBioToolBox to configure network parameters
(see next page)
