1
/
22 • GA FM 1 05.01
G tecHnical Data floWMaRKeR
OPERATION VOLTAGE
12 Volt DC from internal battery
POWER INPUT
3,4 A (in heating operation), Heating power 40 w - fuse intern: 5 x 20 mm
- 6,3 A - medium time lag
POWER SUPPLy “INTERNATIONAL”
for all international voltages, with adapters for EU, GB, USA + Australia
wall outlets, CE + Ul listed! 100 - 240 V AC / 50-60 Hz / 250 mA /18 VA
- output: 12 V DC / 1 A / 12 VA
DIMENSIONS
length 210 mm without application tube, - with standard application tube
500 mm - width 90 mm, height inclusive handle 135 mm
WEIGHT
2,66 kg inclusive battery and appllication tube Ar1
BATTERy
12 V – 2 Ah, lead-acid battery type lC-TA122PU
BATTERy CHARGING TIME
min. 2 hours 80% - 3 hours 100%
OPERATING TIME / BATTERy
for constantly switched-on device circa 2 to 5 hours, dependent on duration
and frequency of fog generation
“SLEEP MODE” OF DEVICE
circa 2 minutes after last pressing fog button
HEAT-UP TIME
max. 30 seconds for cold device
FOGGING MATERIAL
exclusively SAFEX FlowMArkEr FoG FlUID (pressurized can)
TANK VOLUME
circa 16 ml
FLUID CONSUMPTION
circa 0.7 ml/min for continuous fog generation
FOG PERFORMANCE
tank volume lasts for circa 20 minutes continuous fog or for about 420 fog
cycles of circa 3 seconds each
FLUID CAN
pressurized can according to UN No.1950 “AEroSolS”, volume 73 ml =
75 g, sufficient for about 2000 fog cycles of circa 3 seconds each
OPTIONAL ACCESSORy, MATERIALS, SPARE PARTS:
FOGGING MATERIAL
SAFEX FlowMASTEr FoG FlUID, pressurized can with 72 ml
CONDENSATION ABSORBING RINGS
pack. containing 10 pieces, type kr 1
pack. containing 10 pieces, type kr 2
SPARE FILTERS
pack. containing 2 filters and 2 seal rings
BATTERy CHARGER “INTERNATIONAL”
power supply with battery clip for external battery charging, for all inter-
national voltages, with adapters for EU, GB, USA + Australia wall outlets,
CE + Ul listed
100-240 V AC / 50-60 Hz / 250 mA /18 VA - output: 12 V DC / 1 A / 12
VA
power supply with battery clip for external battery charging
SPARE BATTERy
PANASoNIC type lC- TA 122PU, 12 V /2 Ah
APPLICATION EXTENSION TUBE
type Ar 2, impact resistant plastic tube with fitting,
standard length 75 cm, optional up to max. 1.5 m
TRANSPORTATION CASE
plastic case with rigid foam compartments for safe transport of the basic
equipment
Содержание Tintschl Engineering FlowMarker
Страница 25: ...GA FM 1 03 05 22 25...
Страница 26: ...26 22 GA FM 1 05 01...
Страница 27: ...GA FM 1 03 05 22 27...
Страница 28: ...28 22 GA FM 1 05 01...