Safety Vision ROADRECORDER 8000, Руководство пользователя

Страница: 4 / 40

Components
Front Panel
1 - LED Status Lights
- Displays the status of
various NVR operations (see table below).
2 - LAN Port
- Access port for the NVR’s
Configuration menus. The IP is182.168.1.200.
3 - USB Ports
- USB 3.0 ports for optional
external accessories.
4 - Hard Drive Lock
- Insert the supplied
security key and turn 90 degrees left to unlock
the hard drive. Turn the key 90 degrees right to
lock the hard drive.
5 - SD Card
- Currently under development.
6 and 7 - SIM Cards
- Currently under development.
8 - SIM and SD Cards Access Panel
- Remove the two
screws to remove the panel and access the SIM and SD cards.
9 - Hard Drive Bay
- Insert or remove the removable hard
drive. See the Hard Drive chapter for more information.
LED Color Status
Green On : NVR is ready to record
Blink : NVR Power on (startup) condition met
Red
On
: Vehicle power failure, in offload/shutdown
sequence
Blink
: Shutdown condition met, shutting down
after offload
Off NVR shut down complete
Green On : All cameras initialized correctly and have video
Blink
: Camera initialization in progress
Red
On
: One or more cameras has video loss
Blink : One or more camera initializations failed
Green On : Writing to Primary
Red On : Writing to Secondary
Green On : NVR running and recording
Blink : NVR running, but not recording currently
Red
On
: One or more events have been recorded
Blink : NVR shutting down
Off NVR powered off
2 ROADRECORDER 8000 NVR USER GUIDE