Appendix C: Axis
Device Configuration
The RoadRecorder 8000 supports both
the Safety Vision SVC-2200 series cameras
in addition to Axis network cameras.
Configuration is identical except Axis
cameras must be configured with the login
and password both set to root. Use the
following procedure to properly configure
an Axis network camera:
1.
Connect both a PC and the Axis
device to a power over Ethernet
(PoE) switch and ensure the PC is
on and the PoE switch is receiving
power. Allow the camera enough
time to start up (1 to 2 minutes).
2.
Configure a static IP address on the
PC to
192.168.0.100
.
In Windows, open Network Connections.
Right-click the LAN connection and
select
Properties
. In the list of items,
select
Internet Protocol (TCP/IP)
and then click
Properties
.
3.
On the PC, in an internet browser, navigate to
192.168.0.90
.
The camera’s login screen appears.
4.
Enter
root
in the
Password
and
Confirm
password
fields.
5.
Click
OK
.
A prompt appears requesting a login with the
newly set password.
6.
Enter
root
for both the username and
password.
7.
Click
OK
.
A prompt screen appears requesting the power
line frequency in your area.
8.
Ensure the appropriate Hz value is entered in
the field and click
OK
.
The Axis camera is now configured to operate
with the RoadRecorder 7000S NVR.
For Axis audio devices, follow the steps above, then
additionally ensure that the
Encoding
field is set to
G711 µ-law under
Audio Settings
, as shown in the
screenshot.
34
ROADRECORDER 8000 NVR USER GUIDE
Содержание ROADRECORDER 8000
Страница 1: ...ROADRECORDER 8000 NVR USER GUIDE...
Страница 35: ...Appendix B Dimensions ROADRECORDER 8000 NVR USER GUIDE 33...
Страница 39: ...ROADRECORDER 8000 NVR USER GUIDE 37...
