Safety Vision roadrecorder 7006 series, Руководство пользователя

Страница: 27 / 42

Sensor Settings
The Sensor Settings page configures
settings for the sensors and fault statuses.
Sensor Inputs
For each sensor input, enter an
alphanumerical name in the Name field
and the number of volts (between 1 and
30) that cause the sensor to become active
in the Threshold field. In the Action field,
select type of event each sensor triggers:
Metadata, Backup Power Event, Simple
Event, Event While Active, or Start/Stop
Event.
When each sensor triggers, an attached
optional monitor can be configured to
display specific camera views.
• Display : select Single (one camera full
screen), Split (two cameras), or Quad
(four cameras)
• Priority : select the priority this sensor
triggering has over other sesnors
• Dwell Time : select the amount of time
the configured camera view displays
after the sensor is triggered
• Cameras : select which available
camera views appear in the displayed
position; the number of fields changes
depending on the entry in the Display
field
Enable J1939
Select this option to enable J1939
communication with compatible devices.
Relay Outputs
For Relay Out 1 and Relay Out 2 , select between None,
External Device, and Fault Status. External Device powers an
external relay. Select Fault Status to display additional Fault
Status Priority and Fault Status fields.
Fault Status Priority
Select 1, 2, or 3 in the
On
,
Slow Pulse Rate
, and
Fast Pulse
Rate
fields to prioritize the fault statuses below assigned
those respective signals.
Fault Status
For each fault status, select On, Slow Pulse Rate, or Fast Pulse
Rate signal. These signals power an optionally installed
status LED.
• SSD Failure
• SSD Full
• Camera Failure
• GEO Radius Violation
• Vehicle High Speed
• Vehicle High Acceleration
• Temperature
• GPS Failure
Click Save Changes to save changed entries.
ROADRECORDER
®
7006 NVR USER GUIDE
25