Safety Vision roadrecorder 7006 series, Руководство пользователя

Страница: 4 / 42

Components
Front Panel
1 - Status LEDs
- See table at right.
2 - External GPS Input (top)
- Connect the
Garmin® GPS antenna.
3 - CANBUS (bottom)
- Connect option
CANBUS compatible accessories.
4 - USB Port (top)
- USB 2.0. For firmware
uploads and Service Technician use.
5 - USB Port (bottom)
- USB 1.1. Connect the
LCD Control Panel.
6 - LAN Ethernet (top)
- Use an Ethernet cable
to connect an external Wi-Fi bridge or a computer to access
the configuration web server.
7 - RS-232 (bottom)
- Connect an optional external device.
8 - RS-485
- For future development.
9 - Micro USB
- For Service Technician use only.
10 - Micro HDMI
-Connect an optional external monitor to
display live camera feeds. See the Firmware Settings section
of the Configuration chapter for more information about the
Mosaic function.
11 - Hard Drive Bay
- Insert or remove the removable
hard drive. See the Hard Drive section of the Video Retrieval
chapter for more information.
LED Color Status
Green
On
: NVR is ready to record
Blink
: NVR Power on (startup) condition met
Red On : Vehicle power failure, in shutdown sequence
Blink : Shutdown condition met, shutting down
Off NVR shut down complete
Green
On
: All cameras initialized correctly and have video
Blink : Camera initialization in progress
Red On : One or more cameras has video loss
Blink
: One or more camera initializations failed
Green
Solid
: GPS fix attained
Orange Blink : Searching for GPS signal
Red Off : No GPS signal or error
Green
On
: NVR running and recording
Blink
: NVR running, but not recording currently
Red On : One or more events have been recorded
Blink : NVR shutting down
Off NVR powered off
Green
On
: SSD OK (mounted)
Blink
: SSD activity
Orange On : N/A
Red On : SSD error/failure/not present
Off SSD powered off
Note: SSD error/failure is detected when volume is mounted on SSD.
2
ROADRECORDER
®
7006 NVR USER GUIDE