page 20
111v Tsarigradsko Shose blvd, 1784 Sofia, Bulgaria | [email protected] | www.safetyeng.eu
11.4. Annual maintenance and recertification
WARNING: Failure to send devices for inspection within the time frame outlined
below could result in serious injury or death.
1.
11 months after the Self Belay/s have been in use, the customer contacts the
manufacturer (Safety Engineering) at
2.
For a fixed price, the manufacturer sends out new or refurbished devices to the client.
The client is then required to send back their old devices to the manufacturer within
a week of receiving the replacement ones. This is to ensure that the old devices
are not mistakenly still used after the reception of the replacement devices. Visit
https://safetyeng.us/product/self-belay-re-certification
(USA and Canada)
https://safetyeng.eu/product/self-belay-re-certification/
(Europe and rest of the
world) for more information and pricing.
3.
The new or refurbished devices are warranted for a further 12 months from the date of
arrival to the client.
4.
Any damages that make the Self Belay unsafe within the warranty period will be dealt
with as defined in section Warranty information
Warranty information.
Components of the Self Belay that may need to be replaced during annual maintenance
Body cover
Side cover,left
Main body
Parallel pin
ISO 8734 - 4x10 - A - St
Hex socket head cap screw
ISO 4762 M4x25 - A2
Swivel sleeve
Swivel pin
Leaf spring
Hex nut ISO 4032 M4 - A2
Parallel pin
ISO 8734 - 3x10 - A - St
Locking anchor
Swivel assembly
Side cover, right
Locking disc, side
Locking disc, central
Torsion spring
Flat round head rivet
DIN 674 - 3x16 - St
Body cover
Side cover,left
Main body
Parallel pin
ISO 8734 - 4x10 - A - St
Hex socket head cap screw
ISO 4762 M4x25 - A2
DIN 674 3x16 - St
Swivel sleeve
Swivel pin
Leaf spring
Hex nut ISO 4032 M4 - A2
Parallel pin
ISO 8734 - 3x10 - A - St
Locking anchor
Swivel assembly
Side cover, right
Self belay with webbing
1:1
309.68 g
Signature / Подпис
Signature / Подпис
Signature / Подпис
ERP number / ЕРП номер
Ревизия
N
Date / Дата
Drawn / Начертал
Modification / Промени
0.5 x 45
Chamfers / Фаски
ISO 2768 M
Tolerance / Допуск
Revision
Sheet format
Date / Дата
Date / Дата
Date / Дата
Approved / Одобрил
Checked / Проверил
Drawn / Начертал
Scale / Мащаб
Description / Описание
N drawing / N чертеж
НЕ ИНТЕРПРЕТИРАЙТЕ ЧЕРТЕЖА : АКО ИМАТЕ ВЪПРОСИ, СВЪРЖЕТЕ СЕ С НАС
Собствеността и изпозването на този дизайн са защитени от закона за авторски права на УОЛТОПИЯ АД
Листов формат
Treatment / Обработка
Material / Материал
Weight / Маса
The property and use of this design are protected by the law for the exclusive use of WALLTOPIA AD
DO NOT INTERPRETATE THE DRAWING : IF YOU HAVE QUESTIONS, CONTACT US
A2
3.2
2/18/2020 - Exploded mockup
All sharp corners chamfered 05x45°
1.
Unspecified radii - R1
2.
