page 10
111v Tsarigradsko Shose blvd, 1784 Sofia, Bulgaria | [email protected] | www.safetyeng.eu
9.3. Installation on textile webbing
Self Belay can be installed on textile webbing of width 20 mm. Installation on other webbing
sizes is not recommended.
Before you proceed, remove the plastic washers and keep them together with the original
device packaging.
Place the loop of the webbing inside the opening on top of the device:
Insert the folding pin through the device and the webbing loop, then press it towards the
device until it snaps firmly in place:
