
49
50
Thread Vehicle Belt
Thread vehicle lap belt only
through the belt path (as
shown). Buckle the vehicle
belt.
2.
Tighten Vehicle Belt
Lay your forearm across
child restraint at the belt
path while pulling up on belt
to tighten. With an ALR belt,
pull the belt all the way out
before tightening. Feed the
slack back into the retractor
while tightening.
3.
Check for Proper
Recline
Make sure level line on
side of carrier is level with
the ground. Adjust child
restraint if needed.
You may need to place
a large rolled towel(s) or
foam pool noodle(s) under
the front of the carrier to
achieve correct recline
angle. Check often to be
sure padding is still in place
and the belt is tight.
4.
5.
Check Vehicle Belt
Tightness
Grasp the child restraint
at the belt path
with one
hand. Push and pull the
child restraint from side
to side, forward and back.
The child restraint should
not move more than 1
inch.
NOTE:
If carrier moves
more than 1 inch, try
reinstalling the carrier or try
another seating location.
Place Child Restraint in
Vehicle Rear-Facing
Center the child restraint in
the chosen seating position.
Check the level to ground
line to see if it is level
with the ground. Adjust if
needed.
NOTE:
The carrying handle
can be in any position when
installed in the vehicle.
1.
E. Installing Rear-Facing
E-6
Installing Carrier with
Vehicle Belts
Содержание Comfy Carry Elite
Страница 1: ......