manualshive.com logo in svg

Safety 1st Comfy Carry Elite, Инструкция по эксплуатации, Страница: 10 / 29

Поделиться
Скачать
Safety 1st Comfy Carry Elite Скачать руководство пользователя страница 10

Unbuckle Harness

Press red button. Pull buckle 
tongues out. Place harness 
straps over sides of child 
restraint.

4.

 

Place Child in Child 
Restraint 

Place the child’s bottom and 
back flat against the child 
restraint.  This will increase 
comfort and allow the 
harness straps to be properly 
tightened.

5.

 

To Change Buckle 
Position 

Remove child.  From under 
the seat, insert buckle’s 
metal retainer up through 
the carrier and pad.

a.

 

Check Buckle 
Position 

Determine which of the 
available buckle positions 
will be most comfortable 
and provide a snug fit for 
your child.

6.

 

Choose new location and 
push the metal retainer 
through pad and carrier.  
Make sure the buckle is 
facing out.

b.

 

Pull on the buckle to 
check to make sure 
buckle’s metal retainer 
is completely inserted 
through the pad and 
carrier.

c.

 

Failure to reinstall the harness system correctly 
can result in serious injury or death.

Buckle Placement for 
Small Infants

Choose the slot closest to 
the back of the restraint.  
Push metal retainer 
through the pad and 
carrier.  Make sure buckle 
is facing out.

d.

 

continued on next page.

C. Basic Use

17

18

Содержание Comfy Carry Elite






























Отзывы:

Нет отзывов