Safety 1st Comfy Carry Elite, Инструкция по эксплуатации, Страница: 17 / 29

C. Basic Use
31
32
C-12 Installing Harness System
NOTE: If you have completely
removed the harness, start on
the left side, insert harness
in the harness slot, going
through both pad and shell.
Make sure you weave the
harness in and out of the
shell, between shell and pad,
as shown.
From the front, make harness
ends even with each other.
Thread harness straps
through each buckle tongue
from the back to the front
(1) , thread through chest clip
(2) and push harness ends
through slots in the seat
back
(3) . Do not twist the
harness.
1.
From the back of child
restraint, attach harness
straps to the splitter plate. 2.
Failure to reinstall the harness system can
result in serious injury or death.
3
2
1
Your vehicle’s features may be considerably different than
those pictured here. Consult your vehicle owner’s manual to
help identify your vehicle’s specific features and locations.
D-1 Understanding Your Vehicle
LATCH Anchors
Located in the seat
bight.
Air Bags
Consult your vehicle
owner’s manual for
all air bag locations.
Seat Bight
Vehicle Seat Belts
Consult your vehicle
owner’s manual for
vehicle belt use.
Safety Tip:
To help protect your vehicle seat’s upholstery from
damage, use a single layered towel underneath and
behind child restraint.
To avoid your child being seriously burned,
take the following precautions:
1. Park in the shade or where sun does not directly
hit the child restraint.
2. Cover the child restraint with a sheet or blanket
when not in use.
3. Check for hot child restraint and buckles before
placing child in child restraint.