Operating Your Monitor
8. Sensitivity:
You can adjust the sensitivity of the Baby Unit’s microphone from the Parent’s Unit. For
example, if your baby is a particularly quiet sleeper, you can increase the sensitivity levels so
that you are sure to hear if baby becomes disturbed.
To adjust sensitivity,
press .
The Sound Sensitivity LEDs that represent current sensitivity level will illuminate steadily.
Press the or button to increase or decrease sensitivity. When all five green LEDs
are lit, it represents highest sensitivity. When only one green LED is lit, it represents lowest
sensitivity.
7. Light On:
To turn on,
press the night light button on top of the Baby’s Unit. Press
again to turn off.
9
10. Restore to Factory Settings:
To return the Baby’s Unit or Parent’s Unit to factory setting,
press and hold the
power button until all LEDs on the unit become lit. Immediately (while LEDs are lit) press
and hold the volume button ( for Baby’s Unit or for Parent’s Unit) until an audible
beep is emitted from Parent’s Unit.
NOTE:
You need to restore each unit back to factory
settings individually.
Baby’s Unit Factory Defaults:
Speaker volume: Level 3
Parent’s Unit Factory Defaults:
Speaker volume: Level 1
Speaker sensitivity: Level 5
Sound alert: Off
9. Sound Alert:
When Parent’s Unit volume is down, the sound alert emits an audible beep, allowing you
to hear if baby is disturbed. The beep will be audible even when volume is off.
Sound alerts are played only on the Parent’s Unit.
