SAFEMATIC ST-1100i, Руководство пользователя

Страница: 6 / 18

SAFEGREASE, SAFEOIL
ST-1100i
110i1CEN.doc 16.04.2003 Rev. 1C
4 (14)
3 OPERATION
3.1 Normal mode
3.1.1 Phase codes for normal mode and alarm mode
When control center is in normal or alarm mode, the phase code corresponding to the program
phase is shown on the value display.
Phase code Phase description Time display
I Center is counting lubrication interval ( I nterval
counting)
Interval duration
P Center is pressurizing the system ( P ressurizing)
Pressurization time
used
L Interlocking switch is closed ( L ocked) Locking time used
AL Lubricant container low level limit ( A larm, L ow
level)
Alarm time used
AP Pressure alarm ( A larm, P ressurizing)
Alarm time used
Ed Extra delay time for grease lubrication system
pressure switch operation pressurization (
E xtra
d elay)
Delay time left
dC Pressure discharge waiting time in pressure
transmitter operation
(
d is C harge)
Discharge time used
CL Center is closed (maximum pressurization time =
0)
(
Cl osed)
Closed status duration
AE Electronics error alarm
(
A larm, E lectronics)
Error code
Interval counting
Center is always counting interval time, except when
•
center is in alarm mode or turned off
•
Interlocking switch is closed
•
center is closed (maximum pressurization time = 0)
Pressurization extra delay time
Pressurization extra delay time is used, when grease lubrication systems (SG1 and SG2) are in
pressure switch mode.
Pressurization extra delay time is the minimum time between two pressurization phases. When
the delay setting prevents pressurization, there is phase code
Ed in the value display and time
display shows the delay time left.