SAFEGREASE, SAFEOIL
ST-1100i
110i1CEN.doc
16.04.2003 Rev. 1C
2 (14)
2.2 Control Panel
2.2.1 General
Control panel is located inside the casing. Control panel has a 6-character display, three
buttons and the input/output LED signals. The display and buttons can be used for setting the
default values for lubrication program and for turning on manual control.
2.2.2 Display
The control panel has a 6-character 7-segment display.
The display has been divided into two groups
•
2-character value display gives the phase or value
code
•
4-character time display gives the
value
corresponding to the code
Time display
When time display is showing a time value, the decimal point blinks at intervals of 5 seconds.
Regardless of the code, time is always displayed the same way and as accurately as possible.
Time displayed
Display format
Example
0 s – 99 min 59 s
MM.SS
12 min 34 s =
12.34
100 s -999 min 59 s
MMM.S
123 min 45 s =
123.4
1000 min – 999 min
MMMM.
1234 min =
1234.
> 9999 min
9999.
12345 min =
9999.
2.2.3 Buttons
Button Description
Setting/Pressure
In Setting mode and while entering the password, button can be used to
change the displayed value with arrow keys.
Button can be used to accept transferring into manual operation, if the
value at the display is the code for manual operation. In manual
operation mode, pushing the button runs the function selected at display.
In pressure transmitter use, button can be used for browsing the
pressurized line pressure readings in normal and manual operation
modes.
Ð
Button can be used for scrolling the next display below.
In Setting mode and entering password, button can be used for
decreasing the displayed value, if the
Setting/Pressure
button is
pressed down.
Ï
Button can be used for scrolling the next display above.
In Setting mode and entering password, button can be used for
increasing the displayed value, if the
Setting/Pressure
button is pressed
down.
