Car lift installation, operation and maintenance manual
Type：4SF-4000C
19
Step 16
：
Connect the power supply, test run
；
1.Connect the power source according to the power instructions on the machine nameplate.
2.Check the mechanical latch state insurance.
3.No vehicles shall be placed during the trial run.
4.Make sure all the connections are in good condition
Step 17
：
Adjust the level of the lifting machine at four points
Please do not place any vehicle in adjustment time
A
：
Leveling of the whole machine
Open the power switch on the control box, release the emergency stop switch, press the up button, such as wire rope tension after all,
measure the 2 end of the beam to the main side column base plate distance is equal, if not equal, adjust the top of the column nut until the wire
rope 2 beam four end end plate distance line.
B
：
Leveling of insurance
Hold the unloading handle of the power unit, lift down, until the fall to insurance work state, the wire rope is slack at the moment,
measuring the 2 end of the beam to the main side column base plate distance is equal, if not equal, adjust the top of the column insurance nut until
the 2 beam four end the bottom plate distance line.
Po
w
er
co
rd
G
ro
un
d
w
ire
G
ro
un
d
w
ire
M
oto
rli
ne
U
pp
er
lim
it
lin
e
Tw
o
fal
lli
m
it
lin
e
