Car lift installation, operation and maintenance manual
Type：4SF-4000C
12
<5>:
Install the roof of the column, as shown in the following figure
：
1.Column
，
2. M12*30 six angle screw, 3. M12 flat pad, 4. M12 cushion, 5. M12 nut, 6. top plate
<6>:Erect the upright post, as shown in the following figure.
（
Note: the column erected after need to measure the relative position of four column, provide accurate size for subsequent installation of bridge
）
Attention: according to the chart, pay attention to the direction of the main and auxilia ry column roof
