Car lift installation, operation and maintenance manual Type
：
4SF-4000B
11
Step 9
：
Contact column and beam
：
9.1 Remove M10*30 semicircular head square neck screw , M10 spring washer , M10 flat pad, M10 nut
9.2 Raise the insurance strip in the column (above the beam)
As shown below, and follow the direction of the arrow to move the insurance strip and down to push the column into the beam
9.3
Insert the insurance strip into the beam along the inside of the beam end sealing plate
9.4
Using M10*30 semicircular head square neck screw, spring washer, flat pad, nut to fix the bottom of the insurance stri
9.5 Using the M20 flat pad and nut fixed the insurance
strip
to the top of the column.
9.6 Connect the steel cable at both ends of the beam to the top plate of the column, and use the M20 nut, flat pad fixed
(Details of the wire rope interview: attachment 6 wire rope connection diagram)
