SAEVO Optilight Max, Руководство пользователя

Страница: 18 / 28

18
OPERATION OF EQUIPMENT
• Press the button (05) to turn on the equipment.
• Select the application mode pressing the selection button (09), of which the variations are:
- Continuous: Maximum and continuous mode of light intensity (same luminosity from start to finish of
the polymerization).
- Ramp: Gradual mode of light intensity; it increases gradually.
- Pulsed: Pulsing mode consisting of cycles which oscillate at a fixed frequency.
The application mode chosen will be viewed in the sequence of LEDs (15).
• In order to schedule the time press the button (08) and choose the time 5 thru 20 seconds, which
will be viewed in the display (07).
• After selecting the mode of application and the choice of time, take the handpiece to the patient’s
mouth and position the light guide at a safe distance.
• In order to start the polymerization cycle, press the start button (05). To interrupt it Just activate
it again.
09
08
15
07
Hand piece
INCORRECT
positioning for
battery charging.
Hand piece
CORRECT
positioning for
battery charging.
Continuous
Ramp
Pulsed
14
05