SAEVO Optilight Max, Руководство пользователя

Страница: 19 / 28

19
Application types: Continuous, Ramp and Pulsed
•
Continuous:
Maximum and continuous mode of light intensity
(same luminosity from start to finish of the
polymerization).
• Maximum power = 1200 mW/cm²*
• Ramp:
Gradual mode of light intensity, it increases
gradually.
• Gradual increase = 500 - 1200 mW/cm²*
• Pulsed:
Pulsing mode consisting of cycles which oscillate
at a fixed frequency.
• On/off every 1sec. maximum power =
1200 mW/cm²*
* Tolerance is ± 200 mW/cm²
ATTENTION:
- Recharge the battery when one of the LED continuous, ramp and pulsed are blinking;
- Keep the handpiece in the charging base (connected to the mains power) when not using;
- When the LED of the charging base (14) is indicating red, the battery is being charged;
- The approximate recharging time is 3 hours. After recharging the LED in the charging base
(14) it will change to green, indicating the complete recharging;
- The battery does not have a memory effect and can be recharged even if it is not completely
discharged.
OPERATION OF EQUIPMENT