SAelen TS GS/PUMA 35D, Руководство по эксплуатации

Страница: 43 / 64

The indication RPM too low shows that the
engine speed is insufficient for continuous
material infeed to the rotor
Now the yellow button can be activated
As soon as the infeed roller is rotating and
the rear red control rod is activated, appears
the message
If the rotor speed is too high, the infeed roll-
er is automatically stopped to protect the
machine. At the same time appears the sym-
bol Attention as well as the message over-
speed
After having removed the cause for the
overspeed it is required to reduce the engine
speed to idle running, then increasing it
again to max. Speed, to allow the infeed
roller to re-connect.