![SAelen TS GS/PUMA 35D Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/saelen-ts/gs-puma-35d/gs-puma-35d_operating-manual_3210207012.webp)
23.
Carry out an functional check every day before starting the machine, especially of the safety
equipment (
trailer coupling
, gear linkage, shifting block, cut-off switch on the hoods in case of
the M version etc.). Chipping knives and counter-knives are also to be checked for proper
functioning and tight seat.
24.
Prior to starting the machine the operator must be trained in detail.
25.
The rotor must not be uncovered before standstill and the engine is switched off.
26.
Danger because of flying off pieces. It is to be observed that also in the operating range
pieces such as wood chips might fly out of the hopper area. Body protection is always to be used.
Operation is to be carried out lateral of the hopper.
27.
Note for all machines with engine:
The inclination of the engine during operation (driving) must amount to max. 25°. In case of
reduced oil level the lubrication of the engine is not ensured even at 25°!
28.
Caution when parking the machine on a slope. The machine operator has to ensure that the
machine is safely stationed for the time of the work.
29. After connecting the machine to the tractor vehicle, remove and store the support
wheel.
30.
The machine must only be fed with wood. Ensure that no stones or metal objects enter the
machine.
31.
The machine must not be used for transporting material or persons.
32.
The machine must not be used for pushing or towing.
33.
Battery acid is a caustic fluid. Therefore any contact with eyes, skin and clothes must be
avoided. In case of contact rinse all affected areas with water and go see a doctor, if required.
34.
Always disconnect the battery before any work on the electric installation.
35.
Only
trained personnel
is authorised to carry out these works. The execution of all
installation and removal works as well as special maintenance works is reserved for an authorised
specialist dealer.
36.
Pay attention that you are not drawn into the infeed roller with the clothes.
37.
Regularly clean the lateral skirt such that it remains transparent.
Содержание GS/PUMA 35D
