SAelen TS GS/PUMA 35D, Руководство по эксплуатации

Страница: 27 / 64

Every day
-
Check tight seat of the adjusting joints front side of the trailer coupling/
drawbar
-
Check function of the safety switches and the red control rod
-
Check the engine oil level
-
Check the coolant level
-
Check the cleanliness of engine radiator
-
Check the trailer coupling
-
Check the tight seat of wheel nuts
First time after 4
operating hours
-
Check the tight seat of all fastening screws
-
Check the tension of the rotor drive belts
-
Check the tension of the conveyor
Every 15
operating hours
-
Lubricate the rotor knives and check condition of wearing rings
Every 50
operating hours
-
Check the tension of the rotor drive belts
-
After the first 50 operating hours: Check the tight seat of the 8 fastening screws
from rotor bearings
-
Check knives and counter-knives
-
Lubricate both rotor bearings
-
Check ventilation holes under the rotor for free passage
-
Check if material is wrapped around the bearings and remove
-
Check infeed rollers
-
Check the hydraulic oil level
-
Check the tension of the conveyor
Every 150
operating hours
-
Lubricate front/rear bearings of conveyor
-
1. Replace the hydraulic oil filter (thereafter all 500 operating hours or every 2
years)
-
Lubricate drive chain of conveyor
-
Check condition of counter-knives
Every 300
operating hours
-
Check condition of conveyor and slide plate
-
Check the battery acid level
Every 500
operating hours
-
Change the hydraulic oil (or every 2 years)
-
Replace the hydraulic oil return filter (or every 2 years)
-
Replace the intake strainer in the hydraulic oil tank