SAelen TS GS/PUMA 35D, Руководство по эксплуатации

Страница: 22 / 64

Each time before start-up of the machine ensure that is is standing stable on solid
ground.
Check if the hatch of the expulsion channel is open.
As soon as the engine has reached working speed, the message Press Start
appears and a Smiley .
Press the yellow button on the infeed table to connect the infeed rollers.
Now work can be started.
See page 44 if the engine immediately shuts down again and the message
“Slip Error“ is displayed on the Pilot System .
In case the machine shows difficulties in chipping the material and has to be switched off,
restart the engine only after having removed the cause and the material was removed
from the rotor!!!
Operate the machine only with Non-Road fuels or
commercially available diesel fuel.