background image

You  are  responsible  for  the  safe  use  and  the  maintenance  of  your  plant  shredder.  You 
should  thus  ensure  that  whoever  uses,  maintains  and  works  with  the  equipment  has 
knowledge of the  operating  and  maintenance  methods  as  well as  the safety  measures to 
apply as described in this manual. The user manual informs you of the safety procedures 
to follow when using the plant shredder. 
 
Remember  that  you  are  responsible  for  the  safety  of  the  equipment  and  should  take  all 
precautions in order to protect yourself and those around you. Ensure that EVERYBODY 
who works with this equipment knows how to operate and maintain it. The prevention of 
accidents  is  of  the  utmost  importance.    Follow  the  safety  measures  explained  in  this 
manual in order to prevent all injury. 
 
 

-    Before  using  the  plant  shredder,  it  is  the  duty  of  the  owner  to  ensure  that  all 

possible operators or employees have the user instructions. 
 
 

-    The  most  important  safety  feature  of  this  equipment  is  a  safe  operator.  It  is  the 

operator’s  duty  to  read  and  understand  all  the  safety  and  operating  instructions  and  to 
scrupulously follow them in order to prevent accidents. 
 
 
 

-  No one should handle the 

COUGAR

 shredder if they have not read and 

understood the machine’s instructions. An operator who has not read and understood the 
instructions exposes himself and others to the risk of accidents.

 

 

 
 

 

-  It is not authorised to modify the equipment in any way whatsoever. Any 

unauthorized modification could affect its operation and safety, and possibly reduce 

the service life of the equipment. 

 
 

THINK CAUTION! 

WORK IN COMPLETE SAFETY. 

S A F E T Y    

Содержание GS/COUGAR18P













































Отзывы: