Saeco Phedra Evo D.A. 5P2015, Эксплуатация и обслуживание, Страница: 59 / 92

English
8
59
DISPLAY Description
3.3.
It defines the amount of water to be mixed with the instant powder.
Example: “3” indicates that water will be mixed with the instant product 3.
“022” indicates that 22 units of water will be brewed with the instant product.
The reference unit is preset by the manufacturer.
The amount of water can be adjusted from ‘“1” to “999” in steps of 1.
Important -1
If the instant product parameters ("INSTANT PRODUCT - WATER - % INSTANT
PRODUCT" - % PUMP) are set so as to make the powder dispensing procedure last longer
than the water dispensing one, the vending machine will stop the powder dosing. This is
meant to avoid insufficient mixer washing.
Readjust the set parameters in order to have a correct dispensing procedure, i.e. the
powder dispensing should stop a few seconds before the water stops flowing out. This is
intended to allow correct mixer washing.
Important -2
If the sequence includes more instant products, the sequence "INSTANT PRODUCT -
WATER - % INSTANT PRODUCT" - % PUMP" will appear for each instant product.
Inst. prod. water #:
3:022
3.3.
Enables brewing tests to be carried out on the beverage just set.
By pressing ENTER, the following dispensing buttons are displayed:
Full beverage;
Beverage without powder (soluble/coffee);
Beverage without water.
Beverage test
3.4.
Prebrewing
3.4.1. Quantity of water for coffee beans pre-brewing
Prebrewing [ml]
3.4.2. Coffee bean pre-brewing pause duration
Pre-brew. pause[s/10]
3.5. It allows to stop dispensing by pressing any button
Beverage interruption
no
3.6.
It allows the user to view the composition of the selected beverage before brewing it.
The ingredients are displayed if, when pressing the selection button, the credit necessary for completing the sale
has not been inserted yet.
The ingredient list of the selected beverage is automatically created starting from the recipe, component by
component.
The ingredient descriptions are uploaded from text files stored on a USB key and saved in the memory.
Once uploading has been completed the USB key can be removed. Files have to be named:
“COMP_001.txt”, “COMP_002.txt”, …, “COMP_008.txt” and must be stored on the USB key root.
Description must be placed on a single row, not exceeding 70 characters.
From the programming menu it is possible to activate/deactivate the ingredient display, to upload the description
files from the USB device, view the content of the uploaded files, save the descriptions in the memory on a
USB device. The 'file name' / 'beverage component' combinations are indicated below:
"COMP_001.txt" = Instant product 1
"COMP_002.txt" = Instant product 2
"COMP_003.txt" = Instant product 3
"COMP_004.txt" = Instant product 4
"COMP_005.txt" = Instant product 5
"COMP_006.txt" = Steam or hot milk
"COMP_007.txt" = Coffee K or capsules L or FreshBrew F or pre-ground P
"COMP_008.txt" = Coffee C or beans B
Ingredient management