Saeco Phedra Evo D.A. 5P2015, Эксплуатация и обслуживание, Страница: 56 / 92

English
8
56
DISPLAY Description
2.4.2.
Enables setting of the maximum credit level, beyond which all recharge operations (if
enabled) are ineffective.
By setting MAX RECHARGE = 20.00, the credit on the vending machine will be transferred
to the card if the sum does not exceed 20.00.
Max Card Recharge
10.00
2.4.3. It enables to set the maximum credit level, beyond which the card is rejected by the system.
By setting MAX CARD VALUE = 25.00, the vending machine will reject all cards with a credit which
exceeds this amount.
If this card is detected, the display will not show the credit but a “ ——” message will be displayed
and no sale will be carried out.
Max Card Value
10.00
2.4.4.-8
Coins Enabling
…
2.4.5.
It enables / disables the use of Alternative Payout for the level 3 MDB change-giving coiner.
By setting "Yes" the change-giver is called on to dispense change.
Change is limited to 255 times the scaling factor (typically € 12.75 for the Euro area - with scaling factor of 5).
By setting “No” change is given by exploiting the machine’s algorithm.
Max. change is 60000 units (typically € 600 for the Euro area).
Alt. payout
no
2.4.6. Enables setting of the maximum amount of change which can be dispensed by the
change-giving coiner.
Default = 10.00.
Max change
0.00
2.4.7.
With MDB coin return, the "no change available" status can be selected through the "CHANGE TABLE".
Note
Even if the no change available message is displayed, the vending machine continues to give change as long as
coins are present in the channels.
The minimum level (the same for all channels) can be set on a special menu item.
Exact change policy
0
2.4.8. Enables setting of the minimum number of coins in the channels.
Default = 4.
Min Tube Level
0
2.4.9.
Allows the coin return tubes to be filled by hand.
Press Esc to exit the channel loading mode.
Manual Tube Filling
…
2.4.10. Allows the change-giving coiner channels to be emptied by pressing the beverage selection
keys.
Manual Tube Empty
…
2.4.11.
By setting “N”, the credit inserted can be returned even if no sale has been made.
This function may be useful, for example, for changing banknotes into coins.
By setting “Y”, the credit inserted can be returned as change only after the sale has been
completed.
Default = YES.
Commit to vend
no
2.4.12.-2
Bill Enabling
…
2.4.13.
By setting “Y”, an inserted banknote is stored in the escrow position by the banknote reader
(if supported); this function is supported by the banknote reader.
In this way, if the sale fails or the card system fails to charge, the banknote will be returned.
By setting “N”, any inserted banknote goes to the banknote reader’s stacker, so that the
banknotes cannot be returned.
Default = No.
Bill Escrow
no
2.4.14. When the vending machine is in Master mode, this menu enables setting of the address of any slave connected
vending machine.
If the vending machine is in Slave mode, it enables setting of its address.
Possible addresses are 0x40, 0x48 and 0x50.
Default = 0x40.
MDB Slave Address
0x40