Saeco Phedra Evo D.A. 5P2015, Эксплуатация и обслуживание, Страница: 58 / 92

English
8
58
DISPLAY Description
3.3.
This is the order in which the products making up the beverage are brewed.
The possible choices are:
0 =does not dispense any product
1 = dispenses product 1
2 = dispenses product 2
3 = dispenses product 3
4 = dispenses product 4
5 = dispenses product 5
C = brews coffee using instantly ground coffee
F = brews “fresh brew” coffee using pre-ground coffee
P = brews espresso coffee using pre-ground coffee
B = brews “fresh brew” coffee using instantly ground coffee
W = dispenses hot water
S = dispenses steam in the Cappuccinatore
Consequently, the combination of “3C00” or “30C0” or “03C0” will always dispense product 3 and
coffee beans.
The settings of products making up the beverage will be requested according to the sequence.
Sequence
0C00
3.3.
Sets the quantity of water to be dispensed for the programmed coffee type (C or B). The
quantity can be set from 1 to 999.
H2O / Coffee
38
3.3. It determines the activation time (in tenths of seconds) for dispensing steam through the
Cappuccinatore.
Steam Duration
3.3.
Sets the quantity of water to be dispensed for the programmed coffee type (P).
The quantity can be set from 1 to 999.
Freshbrew Water
3.3. Sets the quantity of water to be dispensed for the programmed coffee type (F).
The quantity can be set from 1 to 999.
Pre-ground Water
3.3. Instant FreshBrew dose (F)
Fresh inst. time
3.3. Instant pre-ground dose (P)
Pre-gr.inst.time
3.3. Defines the amount of hot water to be dispensed.
Just water
101
3.3.
It determines the instant powder delivery rate.
The value can be set between 10 and 100.
The lower the value the smaller the powder delivery rate.
% instant product #:
3:50
3.3. It determines the water delivery rate.
The value can be set between 20 and 100.
The lower the value the smaller the water delivery rate.
% pump #:
3:50
3.3.
This defines the quantity of instant product to be brewed.
Example: The "005" quantity indicates that the motor of instant product 3 will be operated for 5 hundredths of a
second.
The amount of instant product can be adjusted from "1" to "5000" in steps of 1.
Brewing of the instant product does not occur when the parameter is set at “0000” (in this case water is brewed).
Instant prod. dose #:
3:005