Saeco New Royal HD 8930, Руководство по обслуживанию

Страница: 29 / 53

NEW ROYAL 05 TROUBLESHOOTING
Saeco International Group Rev. 01 Page / 07
1 Software
Description of each page
02
1 Software
DF:64
B2C
f: xx Hz * xx.yy.zz
B2B B2B RI MV: xx
Swiss Pow Off ESC
ER:8 Debug
SECTOR TYPE DESCRIPTION
DF FUNCTION Provides information on the memory status. Must be 64
ER FUNCTION Provides information on the memory status. Must be 8
Debug FUNCTION If selected, enables a debug window in user mode
Swiss FUNCTION
The Swiss function is used to enable or disable the ECO-MODE default setting. If Swiss is enabled,
the default for the Eco-Mode is “ON”, if Swiss is disabled the default for the Eco-Mode is “OFF”.
The water circuit emptying function restores the ECOMODE value to the default value. As stated
above, the default value depends on the Swiss setting.
Pow Off
FUNCTION
Indicates whether the machine will go to Stand-By mode when powered up - main electro-mechan-
ical switch (I/O) on, if this occurs the words “Pow Off” are highlighted. If it is disabled, the machine
will not go to Stand-By mode straight after Power On.
ESC FUNCTION If pressed, it exits the Test mode.
B2C INFO If activated, it indicates that the machine version is B2C.
B2B INFO If activated, it indicates that the machine version is B2B.
B2B RI INFO If activated, it indicates that the machine version is B2B with mains water.
MV: xx INFO Indicates the version of the EEPROM Memory
f INFO
Indicates the mains frequency. It has the following values:
50 Hz
60 Hz
ERR if the frequency cannot be detected.
xx.yy.zz INFO Indicates the version of the loaded software.
PartsGuru.com
For Saeco parts, repairs & tech support, contact:
Services Unlimited, Inc./ Parts Guru
209 Walnut street, Lansdale, PA 19446
215-361-7000 - email: sales@partsguru.com
Online store: www.shop.partsguru.com