Saeco GAGGIA VELASCA CMF-OTC, Руководство по обслуживанию

Страница: 34 / 55

Test Mode INTELIA EVO V2 AMF
Filename
Intelia_EVO2_AMF_TestMode_V05
5.0 G Divella 12/06/2015 4/12
revNum Author Verified Approved SaveDate P/PP
1.2 Page 1 (KEYB)
Initial condition: no button pressed.
Press all the buttons from N°1 till N°9
Whenever a button is pressed the “ON” word appears near the
related button number.
Pressing button N°1 the backlight color switches from WHITE to
RED
Pressing button N°2 the backlight color switches from WHITE to
PINK
Pressing button N°7 turns the STANDBY LED on.
To test button N°4 it must be pressed just one time because it
causes the CA to navigate to the next page
In case two or more buttons are pressed at the same time the
display shows the expression “TWO BTN!” This could be a useful
warning if the keyboard is not working properly
ERRORS occur if:
“ON” word does not appear or stays fixed on screen. In this case it’s
necessary to check the communication flat cable connected
between the keyboard and the CPU-Power board. Should not, on
the other hand, change the display color, check the JP5 cable.
Pressing STEAM button
The CA switches to page 2 ( INPUTS )
Test Mode INTELIA EVO V2 AMF
Filename
Intelia_EVO2_AMF_TestMode_V05
5.0 G Divella 12/06/2015 5/12
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Initial condition (having removed all the components)
Insert the tank full of water
The H2O value must turn from “N” to “Y”
ERRORS occur if:
If the H2O value doesn’t change check the capacitive sensor and the
related wiring (JP23).
Insert the Dreg Drawer
The DREG value must turn from “N” to “Y”
ERRORS occur if:
If the DREG value doesn’t change check the dreg drawer
microswitch and the related wiring (JP16).
Close the Side Door (having the dreg drawer already inserted)
The DOOR value must turn from “N” to “Y”
ERRORS occur if:
If the DOOR value doesn’t change check the side door microswitch
and the related wiring (JP14) and verify that the dreg drawer is
correctly inserted.
Test Mode INTELIA EVO V2 AMF
Filename
Intelia_EVO2_AMF_TestMode_V05
5.0 G Divella 12/06/2015 5/12
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Initial condition (having removed all the components)
Insert the tank full of water
The H2O value must turn from “N” to “Y”
ERRORS occur if:
If the H2O value doesn’t change check the capacitive sensor and the
related wiring (JP23).
Insert the Dreg Drawer
The
DREG
value must turn from “N” to “Y”
ERRORS occur if:
If the DREG value doesn’t change check the dreg drawer
microswitch and the related wiring (JP16).
Close the Side Door (having the dreg drawer already inserted)
The DOOR value must turn from “N” to “Y”
ERRORS occur if:
If the DOOR value doesn’t change check the side door microswitch
and the related wiring (JP14) and verify that the dreg drawer is
correctly inserted.
Test Mode INTELIA EVO V2 AMF
Filename
Intelia_EVO2_AMF_TestMode_V05
5.0 G Divella 12/06/2015 5/12
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Initial condition (having removed all the components)
Insert the tank full of water
The H2O value must turn from “N” to “Y”
ERRORS occur if:
If the H2O value doesn’t change check the capacitive sensor and the
related wiring (JP23).
Insert the Dreg Drawer
The DREG value must turn from “N” to “Y”
ERRORS occur if:
If the DREG value doesn’t change check the dreg drawer
microswitch and the related wiring (JP16).
Close the Side Door (having the dreg drawer already inserted)
The DOOR value must turn from “N” to “Y”
ERRORS occur if:
If the DOOR value doesn’t change check the side door microswitch
and the related wiring (JP14) and verify that the dreg drawer is
correctly inserted.
Test Mode INTELIA EVO V2 AMF
Filename
Intelia_EVO2_AMF_TestMode_V05
5.0 G Divella 12/06/2015 6/12
revNum Author Verified Approved SaveDate P/PP
Insert the
Brewing Unit
The
BU-P
value must turn from “N” to “Y”
ERRORS occur if:
If the BU-P value doesn’t change check the BU presence
microswitch and the related wiring (JP16).
Test Mode INTELIA EVO V2 AMF
Filename
Intelia_EVO2_AMF_TestMode_V05
5.0 G Divella 12/06/2015 4/12
revNum Author Verified Approved SaveDate P/PP
1.2 Page 1 (KEYB)
Initial condition: no button pressed.
Press all the buttons from N°1 till N°9
Whenever a button is pressed the “ON” word appears near the
related button number.
Pressing button N°1 the backlight color switches from WHITE to
RED
Pressing button N°2 the backlight color switches from WHITE to
PINK
Pressing button N°7 turns the STANDBY LED on.
To test button N°4 it must be pressed just one time because it
causes the CA to navigate to the next page
In case two or more buttons are pressed at the same time the
display shows the expression “TWO BTN!” This could be a useful
warning if the keyboard is not working properly
ERRORS occur if:
“ON” word does not appear or stays fixed on screen. In this case it’s
necessary to check the communication flat cable connected
between the keyboard and the CPU-Power board. Should not, on
the other hand, change the display color, check the JP5 cable.
Pressing
STEAM
button
The CA switches to page 2 ( INPUTS )
GAGGIA VELASCA 05 SERVICE MODE
3/8
1.3 Page 2 (INPUTS)
Insert the tank full of water
The H2O value must turn from “N” to “Y”
ERRORS occur if:
If the H2O value doesn’t change check the capacitive sensor and the re-
lated wiring (JP23).
Insert the Dreg Drawer
The DREG value must turn from “N” to “Y”
ERRORS occur if:
If the DREG value doesn’t change check the dreg drawer microswitch and
the related wiring (JP16).
Close the Side Door (having the dreg drawer already inserted)
The DOOR value must turn from “N” to “Y”
ERRORS occur if:
If the DOOR value doesn’t change check the side door microswitch and
the related wiring (JP14) and verify that the dreg drawer is correctly in -
serted.
Insert the Brewing Unit
The BU-P value must turn from “N” to “Y”
ERRORS occur if:
If the BU-P value doesn’t change check the BU presence microswitch and
the related wiring (JP16).
Initial condition (having removed all the components)
The CA switches to page 2 (INPUTS)
Pressing STEAM button (Press CAPPUCCINO for OTC version)