Saeco GAGGIA VELASCA CMF-OTC, Руководство по обслуживанию

Страница: 21 / 55

GAGGIA VELASCA 03 BRIEF INSTRUCTIONS
5/6
The milk carafe is incompletely
assembled.
Check that all the components
have been assembled correctly. (OTC)
The AquaClean fil -
ter cannot be ac -
tivated as the tick
does not appear on
the display.
A filter has just been activated.
You have to dispense at least 10 cups
(of 100ml each) before you can ac -
tivate a new filter. Be careful as you
activate a new filter, the filter counter
will increase automatically.
The filter cannot be
activated and the
machine asks for
descaling.
You have already replaced 8
AquaClean filters. After 8 filter
replacements you need to descale
the machine.
Descale your machine first and install
the filter.
The filter has not been replaced
in time after the AquaClean water
filter signal started flashing.
Descale your machine first and install
the filter.
The filter has not been installed
during first installation but after
having brewed approx.50 coffees
(based on 100ml cups). The
machine has to be completely
limescale-free before installing the
AquaClean filter.
First descale the machine and then
install a new AquaClean filter. After
descaling, the filter counter is reset to
0/8. Always confirm filter activation in
the machine menu, also after filter re -
placement
The AquaClean filter was not
correctly activated during first
installation.
Follow the instructions on the display
until you receive confirmation that the
filter has been activated
The AquaClean fil -
ter is installed, but
the descaling mes-
sage appears.
After 8 filter replacements, you
need to descale the machine
First descale the machine and then
install a new AquaClean filter. This will
reset the filter counter to 0/8. Always
confirm filter activation in the machine
menu, also after filter replacement.
The descaling mes-
sage appears be -
fore 8 filters were
replaced
You did not activate the Aqua-
Clean filter correctly during first
installation.
First descale the machine and then
install a new AquaClean filter. Always
activate the filter in the machine
menu.
You placed the AquaClean filter
after having used the machine for
a while.
You did not activate the replace-
ment filter in the machine menu.
You did not replace the filter when
the filter symbol started flashing.
The filter does not
fit.
You need to remove air from the
filter.
Let air bubbles come out of the filter.
There is still water in the water
tank.
Empty the water tank before you
install the filter